DWC Hydroponics – The Bubbletastic way to grow!

Deep Water Culture / Bubble-buckets

There are several methods of growing hydroponically. The main ones are: Flood & Drain (aka Ebb and Flow/Flood), NFT (Nutrient Film Technology) and finally DWC (Deep Water Culture, or Bubble-Buckets).

The Flood and Drain method is one of the oldest and most traditional of hydroponics grow methods. However, it uses a large amount of grow media, and requires the use of a large reservoir. NFT uses less media, and keeps grow-heights slightly lower. However, the plants usually need lots of additional support. As with many things, there are advantage/disadvantages and compromises to be had with the different ways of growing a plant.

The Deep Water Culture (DWC), or “Bubble-bucket” method offers a different way again of hydroponic growing. It is hugely popular and only ever getting more so! One of it’s main advantages is a low requirement for grow medium.  This is because only a small net-pot filled with clay pebbles is needed for each plant, the roots then grow down out of this into a larger well-aerated reservoir of nutrient solution below. As well as this, DWC boasts fast plant growth and a reduced need for bulky equipment. To top it off, it’s inexpensive and simple to set up. See here: DWC Systems and here: Air Pumps & Airstones

Excellent success can easily be had with such a system as long as a few good pieces of advice are followed:

1) When rooted cuttings are first transplanted into the system, the surrounding clay pebbles must be watered (usually by hand) once or twice daily until sufficient roots get down into the nutrient solution below and the plant can reach water for itself.

2) There must be an airstone in the bottom of the reservoir that is fed by a pump with sufficient airflow to keep the solution well oxygenated and mixed. We would generally recommend about 1-5 litres/minute for the average size (15-20 litre) DWC bucket. Some growers go much higher than this with a “more must be better” line of thinking. However, we believe there is a limit to how true this is. At the crazy end of the scale too much air flow will create an absolute maelstrom inside the reservoir with the roots being thrown around continuously. This could lead to root damage. We’d suggest it’s best to stay on the sensible side of things and everything will be just fine.

3) The air pump must be left on at all times. If the pump breaks, it needs to be replaced quickly because the dissolved oxygen in the solution will get used up in no time. The plant roots need oxygen to be healthy. It’s a good idea to have a spare pump to hand just in case the worst should ever happen.

4) The reservoir needs to be topped up and kept within a few centimetres of the bottom of the net pot. This is key. If the reservoir gets too low, there won’t be enough roots submerged in the nutrient solution to supply the plant with adequate water. We have known growers who have got caught out during peak flowering. Their plants had literally started getting through half a reservoir of solution a day. By the time they checked after 2 days, the reservoir was empty and the plants had already suffered.

5) Keep an eye on the temperature of the reservoir. The motors in poor quality air pumps (or those that have been covered over to keep the sound down) will get hot. This heats the air being fed to the bubble buckets which in turn heats up the nutrient solution. Once the temp of the water rises over about 23C, there is an ever-increasing risk of diseases like pythum. Plus the warmer that water gets, the less oxygen that can be dissolved in it.

If you stick to those guidelines you’ll have a nice, inexpensive grow system that will really deliver the goods. And won’t create a huge amount of medium that needs to be got rid of after each grow!